THS Evolution Split, room controller for controlling multiple fan coils via master / slave units.
The Evolution Split THS equipment enables the control of up to 7 fan coils connected to a master unit. The master unit is mounted on the wall, while the slave units are mounted in the fan coils. The master unit allows you to set the operating parameters and display the status of the remote slave units via the internal network. Slave 1 supplies the power to the master unit and is also equipped with a second Modbus communication port that allows a supervision system to monitor the status of all equipment.
Navigate on this page
Specifications
| Internal sensor | Temperature+humidity |
|---|---|
| Communication | Modbus |
| DI | 2 |
| Clock | X |
| Supply voltage | 5 V DC |
|---|---|
| Ambient temperature | 0…50°C |
| Display | |
| Inputs | 2 |
| Communication | internal network |
| Dimensions (WxHxD mm) | 128 x 80 x 55.5 |
| Mounting | wall mounting |
| Protection class | IP30 |
| Isolation class | II |
| Certification | EN 60730-1 |
| Supply voltage | 110…240 V AC, 50/60 Hz |
| Power consumption | Max, 1,1 W (3,5 VA) slave THS-0MM (with power supply for master unit) |
| Ambient temperature | 0…40°C |
| Inputs | 2 potential free contacts / 2 NTC10K sensors / USB port for parameters setting and software update |
| Outputs | 3 analogue outputs 0…10 V (RL> 10 K) / 5 relays SPST 250 V AC, 3A (AC1) / 1 relay SPST 250 V AC, 10 A (AC1) |
| Communication | Modbus RTU (Slave) to BMS and internal network |
| Dimensions (WxHxD mm) | 140 x 123 x 45 |
| Mounting | on board fan coil |
| Protection class | IP30 |
| Isolation class | II |
| Certification | EN 60730-1 |